How to install Robolinux Gnome Raptor Series 10

Please at least share my gofundme page on your social media and ask your friends to help!
Thank you for caring! John Martinson aka "Robo"

Share this gofundme campaign

Robo's family of 5 needs help

How to install Robolinux Gnome Series 10

Follow these instructions to install Robolinux easily & quickly:

Backup all of your important existing data on your machine.
Most PC Users have a backup, make sure you do this before you proceed!

Download the Robolinux64 iso file to your PC or laptop. WARNING: There are no 32 bit Series 10 Versions
Note: If you don't know whether your PC or laptop has a 32 or 64 bit processor,
then simply google the make and model number to find out.

Burn the Robolinux.iso you downloaded to a DVD.
Click the DVD  if you need instructions on how to burn an iso image file onto a DVD


Put the Robolinux.iso you downloaded onto a USB Stick.
Click the jet  if you need instructions on how to put an iso image file onto a USB stick

In almost all cases Robolinux will find your Wifi driver so you can install it using Wifi. If not then be sure you are plugged into the internet with an ethernet cable on your router. Otherwise your installation will fail to use the network mirrors and you will not be able to install any drivers or software.

Now insert your new Robolinux.iso DVD or USB stick into your PC or laptop and reboot it.

Please note: You will have to set your BIOS to boot off either a DVD or USB stick depending on which one you are using to install Robolinux. In addition you can decide whether to install Robolinux using UEFI or even Secure boot if that's what you want.

If you boot off a DVD your PC or laptop will load this Robolinux installer boot menu screen below.
WARNING!: You must run it live off of the DVD or USB stick. DO NOT select Install or you will not be able to boot from Grub!

IF YOU BOOT UP USING A USB STICK YOU WILL SEE THE SCREEN BELOW. If you are installing Robolinux using UEFI you will see an Install option. DO NOT SELECT INSTALL ROBOLINUX_10
Only click on Boot Robolinux_10 Live System. The installer will be available on the live session Desktop.

You can then install it by clicking on the "Install Robolinux_10 18.04" installer icon on the Desktop.

Select your language and click on continue.

Select your keyboard layout and click on continue.

Please note that it is not necessary to select "Install 3rd-party software" as the Robolinux OS already has them in the iso file.

Choose your installation type and click on "Install Now".

Click on continue.

Select your time zone by clicking on the country and city and press the continue button.

Enter your pertinent information and your password. When you are finished click on Continue.
Be certain to remember or write down your password for future reference.
This will also be your super user password for Administrative access.

Robolinux is now installing. This process is quite fast. Normally just a few minutes.

Congratulations! Robolinux is now fully installed. It is time to restart your computer.

Please remove your DVD or USB stick and press enter.

Here is the Robolinux Grub boot screen for a non UEFI system or with multiple partitions on the hard disk.

As you can see we do not live on a spinning ball. Do the the research like Robo & millions of others did who
have an open mind. Or Don't! One thing is for sure water cannot bend. "The truth will set you FREE!"

Feel free to change your Grub boot splash screen as you wish.
Use CLI or install the GUI app called "Grub Customizer".

Here is the Robolinux User Login screen. If you want to change it simply use
the "Login Window" menu option located at the top of "Administration" from the main menu.

Welcome to Robolinux Gnome Series 10! Enjoy your new virus & malware free life!

Copyright 2011-2019 Company Info Privacy Terms of Use