Follow these instructions to install Robolinux easily & quickly:
Backup all of your important existing data on your machine.
Most PC Users have a backup, make sure you do this before you proceed!
Download the Robolinux32 or Robolinux64 iso file to your PC or laptop. Note: If you don't know whether your PC or laptop has a 32 or 64 bit processor,
then simply google the make and model number to find out.
Burn the Robolinux.iso you downloaded to a DVD. Click the DVD if you need instructions on how to burn an iso image file onto a DVD
Put the Robolinux.iso you downloaded onto a USB Stick. Click the jet if you need instructions on how to put an iso image file onto a USB stick
In almost all cases Robolinux will find your Wifi driver so you can install it using Wifi. If not then be sure you are plugged into the internet with an ethernet cable on your router. Otherwise your installation will fail to use the network mirrors and you will not be able to install any drivers or software.
Now insert your new Robolinux.iso DVD or USB stick into your PC or laptop and reboot it.
Please note: You will have to set your BIOS to boot off either a DVD or USB stick depending on which one you are using to install Robolinux. In addition you can decide whether to install Robolinux using UEFI or even Secure boot if that's what you want.
Your PC or laptop will load this Robolinux installer boot menu screen below.
It is required to run it live off of the DVD or USB stick.
IF YOU BOOT UP INTO THIS SCREEN DO NOT SELECT INSTALL ROBOLINUX_9.1
Only click on Try Robolinux_9.1 without installing. The installer will be available on the live session Desktop.
You can then install it by clicking on the "Install Robolinux_9.1 16.04" installer icon on the Desktop.
Select your language and click on continue.
Please read the installer warning about UEFI and other operating systems before you proceed to install a dual boot system. We recommend that if you have an existing non UEFI partition you should click the back button which will install Robolinux as a non UEFI OS. Then you will be able to boot either operating system from the Grub Boot menu.
Please also note that it is not necessary to select "Install 3rd-party software".
Choose your installation type and click on "Install Now".
Click on continue.
Select your time zone by clicking on the country and city and press the continue button.
Select your keyboard layout and click on the continue button to the right.
Enter your pertinent information and your password. When you are finished click on Continue.
Be certain to remember or write down your password for future reference.
This will also be your super user password for Administrative access.
Robolinux is now installing. This process is quite fast. Normally just a few minutes.
Congratulations! Robolinux is now fully installed. It is time to restart your computer.
Here is the Robolinux Grub boot screen for a non UEFI system or with multiple partitions on the hard disk.
As you can see we do not live on a spinning ball. Do the the research like Robo & millions of others did who
have an open mind. Or Don't! One thing is for sure "The truth will set you FREE!"
Feel free to change your Grub boot splash screen as you wish.
Use CLI or install the GUI app called "Grub Customizer".
Here is the Robolinux User Login screen. If you want to change it simply use
the LightDM GTK+ Greeter Settings option in the control center.
Welcome to Robolinux Cinnamon Series 9! Enjoy your new virus & malware free life!